OUR FABRICATION DEPARTMENT

ACCU-KUT TABLE POWERED BY THIS HYPERTHERM XPR 170 PLASMA CUTTER

Industrial cutting machine with two black and white printed circular logos on its surface in a workshop or factory setting with various equipment and supplies in the background.
A Hypertherm XPR 170 plasma cutting machine in a workshop, with hoses and tools on top, surrounded by industrial equipment and metal materials.

Table Size : 6' × 12'

Cutting and piercing capabilities :

Mild steel cut capacity : Up to 1-9/16″ with argon assist

Mild steel cut capacity : Up to 1-3/8″  with standard air

Stainless steel cutting capacity : Up to 7/8″

Aluminum cutting capacity : Up to 1″

Pierce capacity : 1-9/16″ with argon assist

Pierce capacity :  1-3/8″ with standard air

Severance capacity : 2-3/8″

AMADA : PROMECAM PRESS BREAK

PIRANHA : P-90 METAL WORKER

A green industrial metalworking machine in a warehouse, surrounded by tools, cylinders, and equipment.

Punching Capacity : 90 tons; 1-1/8" through 1"

Throat Depth : 10"

Flat Bar Shear : 1" × 8"

Angle Shear : 5" × 5" × 1/2"

Round Bar Shear : 1/2" to 2"

Square Bar Shear : 1/2" to 1-3/8"

Coper Notcher : 3-1/2" × 5"

Stroke Length : 4-7/8"

CNC Operated 240-Ton Press

Blue Miller Millermatic 252 welding machine with digital display on a black base, connected to a green gas cylinder in an industrial workshop.

High output and performance : Delivers a maximum of 250 amps at 28 VDC, with the ability to weld thicker materials for longer periods.

Auto-Set™ technology : Automatically sets voltage and wire feed speed for you, eliminating guesswork and making it easy to get started.

Digital front panel : Allows you to manually preset voltage and wire feed speed and access a menu for standard run-in, pre/postflow, burnback, spot, and delay (stitch) timers.

Auto Gun Detect : Automatically detects and recalls the correct settings when you switch from a MIG gun to a spool gun or push-pull gun.

Push-pull gun compatibility : Directly connects to a push-pull gun (Spoolmatic 15A or 30A) or a Spoolmate 200 series spool gun.

Cast aluminum drive system : A durable, dual-gear drive with a quick-change, reversible drive roll and an easy-to-set tension knob.

EZ-Change™ low cylinder rack : Makes it easy to roll gas cylinders on and off the rack without heavy lifting.

EZ-Access™ consumable compartment : A flip-down compartment that provides quick access to spare consumables and a parameter chart.

Portability : Comes standard with a running gear/cart, and a longer 15-foot M-25 gun provides a larger work area.

MILLERMATIC® 255 - MIG

An industrial welding setup with a blue Miller Millermatic 255 welding machine and an attached oxygen cylinder, surrounded by various metal pipes, tools, and equipment in a workshop or garage environment.

Intuitive interface : A 7" color LCD screen with Auto-Set Elite simplifies operation by providing pre-programmed settings for various applications.

Advanced welding capabilities : It supports MIG, Pulsed MIG, and Flux-Cored welding, with the Pulsed MIG feature delivering higher-quality welds with less heat input and spatter.

Program mode : Allows users to save and recall custom weld settings for quick and easy recall of favorite programs.

Auto-Line™ Technology : Automatically adjusts to input voltages between 208V and 240V single-phase, making it a versatile option for different job sites and power sources.

Heavy-duty performance : It has a 60% duty cycle at 230 amps and can weld material up to 1/2" thick.

Versatile gun compatibility : It is compatible with push-pull and spool guns, increasing its productivity for aluminum welding.

Portability : It features an optional EZ-Latch™ running gear, making it easier to transport. 

XMT® 304 CC/CV - MULTIPROCESS WELDING

Welding machine station with wire reel, several gas cylinders, and tools in an industrial workshop.

Processes : MIG (GMAW) Pulsed MIG (GMAW-P) Stick (SMAW) TIG (GTAW) Flux-cored (FCAW) Air carbon arc cutting and gouging (CAC-A).

Auto-Line Technology : Automatically links to the primary input voltage.

Adaptive Hot Start : Increases output for better arc starting.

Lift-Arc : Allows for TIG welding with a lower risk of contamination compared to scratch-start TIG.

Fan-On-Demand : The fan runs only when needed to reduce noise and dust.

Durable Construction : Features a lightweight, aerospace-grade aluminum case.

Industrial metal fabrication machine in a workshop with cutting tools, measuring tape, and soda can on a workbench in front

MILLERMATIC® 252 - MIG

SYNCROWAVE® 250 DX - TIG/STICK

Welding machine in a workshop with gauges and tools in the background.

HYPERTHERM POWERMAX65 SYNC HAND CUTTING SYSTEM

A welding helmet with an American flag design resting on a Hypertherm Powermax 65 Plasma Cutter machine, workspace with tools, cables, and a wood block in the background.

Squarewave Technology : Improves aluminum welding with arc stability and tungsten erosion resistance.

Syncro Start : Allows for a choice of TIG arc starts (Soft, Standard, or Hot).

Adaptive Hot Start : Automatically increases amperage at the start of a stick weld to prevent sticking.

Balance Control : Adjustable for oxide removal when welding aluminum.

Last Procedure Recall : Simplifies switching between different welding processes.

Digital Welding Meters : For easy monitoring.

Line Voltage Compensation (LVC) :Keeps output constant despite input voltage fluctuations (± 10%) .

SmartSYNC® torches with the cartridge automatically set the correct amperage and operating mode, eliminating setup errors

Easy to identify single-piece cartridges are color-coded by process to eliminate parts mix-up and simplify consumable inventory management

End-of-life detection lets the operator know when it's time to change the cartridge

Simplified operation minimizes downtime, troubleshooting, waste, and training time